HMS Sovereign of the Seas
Share
darivs
865 views

HMS Sovereign of the Seas

Build log photos of model ship, HMS Sovereign of the Seas. Highly modified with scratch built additions and changes, based on the DeAgostini model kit.
1396 images
975-Glue-Next-Deck-Piece-Down.jpg
975-Glue-Next-Deck-Piece-Down
974-Glue-Deck-Piece-in-Place-and-Hold-With-Weights.jpg
974-Glue-Deck-Piece-in-Place-and-Hold-With-Weights
973-Apply-PVA-Glue.jpg
973-Apply-PVA-Glue
972-Trim-Edges-to-Avoid-Wiring-and-Resistors.jpg
972-Trim-Edges-to-Avoid-Wiring-and-Resistors
971-Test-Fit-False-Deck-Pieces.jpg
971-Test-Fit-False-Deck-Pieces
969-Darken-Lines-with-Pen.jpg
969-Darken-Lines-with-Pen
967-Mark-Pencil-Lines-where-Wires-Are.jpg
967-Mark-Pencil-Lines-where-Wires-Are
968-Pull-Tape-and-Place-onto-Thin-Plywood.jpg
968-Pull-Tape-and-Place-onto-Thin-Plywood
966-Apply-Tape-to-Make-Deck-Pattern.jpg
966-Apply-Tape-to-Make-Deck-Pattern
965-Painted-Wires-Brown.jpg
965-Painted-Wires-Brown
964-Run-Lighting-Power-Wires-up-for-Forecastle.jpg
964-Run-Lighting-Power-Wires-up-for-Forecastle
963-Run-Lighting-Power-Wires-up-in-Stern.jpg
963-Run-Lighting-Power-Wires-up-in-Stern
961-View-in-Port-Aft-Gunport.jpg
961-View-in-Port-Aft-Gunport
959-All-LED-s-Installed-on-Middel-Gun-Deck.jpg
959-All-LED-s-Installed-on-Middel-Gun-Deck
960-View-from-Stern.jpg
960-View-from-Stern
957-LED-s-Forward-of-Fore-Capstan-Installed.jpg
957-LED-s-Forward-of-Fore-Capstan-Installed
958-Test-the-LED-s.jpg
958-Test-the-LED-s
955-LED-Hooks-Around-Beam-or-Ledge.jpg
955-LED-Hooks-Around-Beam-or-Ledge
956-Route-and-Solder-LED-Leads-to-Conductors-and-Secure-With-PVA-Glue.jpg
956-Route-and-Solder-LED-Leads-to-Conductors-and-Secure-With-PVA-Glue
953-Untwist-Yellow-Nano-LED-Leads.jpg
953-Untwist-Yellow-Nano-LED-Leads
952-Black-Wire-Soldered-to-Negative-Conductor.jpg
952-Black-Wire-Soldered-to-Negative-Conductor
951-Solder-Power-Wires-to-Conductors.jpg
951-Solder-Power-Wires-to-Conductors
949-Separate-Two-Remaining-Power-Wires.jpg
949-Separate-Two-Remaining-Power-Wires
950-Run-Power-Wires-to-Conductors.jpg
950-Run-Power-Wires-to-Conductors
947-Conductors-at-Aft-End.jpg
947-Conductors-at-Aft-End
948-Conductors-on-Forward-Edn.jpg
948-Conductors-on-Forward-Edn
946-Repeat-for-Positive-Conductor-on-Port-Side.jpg
946-Repeat-for-Positive-Conductor-on-Port-Side
945-Masking-Tape-Used-to-Hold-Conductors-While-Glue-Dries.jpg
945-Masking-Tape-Used-to-Hold-Conductors-While-Glue-Dries
943-Negative-Conductor-Wire-on-Stbd-Side.jpg
943-Negative-Conductor-Wire-on-Stbd-Side
944-End-of-Conductor-Wire-is-Glued-in-Hole.jpg
944-End-of-Conductor-Wire-is-Glued-in-Hole
942-Press-Staple-Until-CA-Glue-Dries.jpg
942-Press-Staple-Until-CA-Glue-Dries
938-Drill-Holes-for-Staples-With-Drfemel.jpg
938-Drill-Holes-for-Staples-With-Drfemel