La Couronne 1636
Share
darivs
286 views

La Couronne 1636

French great ship and royal galleon La Couronne, built from Corel kit and scratch.
1402 images
528-Trim-Off-Cord-Ends.jpg
528-Trim-Off-Cord-Ends
527-Secure-with-Diluted-PVA-Glue.jpg
527-Secure-with-Diluted-PVA-Glue
525-Begin-Tying-Foremast-Wooldings.jpg
525-Begin-Tying-Foremast-Wooldings
526-Whippet-Knot-for-Wooldings.jpg
526-Whippet-Knot-for-Wooldings
524-Progress-So-Far.jpg
524-Progress-So-Far
523-Mast-Assemblies-Fitted-but-not-Glued.jpg
523-Mast-Assemblies-Fitted-but-not-Glued
522-Make-Mizzen-Topgallant-Trestle-tree-the-Same-Way.jpg
522-Make-Mizzen-Topgallant-Trestle-tree-the-Same-Way
521-Make-Main-Topgallant-Trestle-Tree-the-Same-Way.jpg
521-Make-Main-Topgallant-Trestle-Tree-the-Same-Way
520-Trestle-tree-Glued-Only-to-Fore-Topgallant-Mast.jpg
520-Trestle-tree-Glued-Only-to-Fore-Topgallant-Mast
519-Trestle-tree-Assembled-and-Glued.jpg
519-Trestle-tree-Assembled-and-Glued
518-Fore-Topgallant-Trestle-Tree-Assembly.jpg
518-Fore-Topgallant-Trestle-Tree-Assembly
516-Break-Piece-Out-With-Twist-of-the-Knife.jpg
516-Break-Piece-Out-With-Twist-of-the-Knife
515-Sawing-Fore-Topgallant-Cross-Tree-Notches.jpg
515-Sawing-Fore-Topgallant-Cross-Tree-Notches
514-Port-Bow-Tower-Lighting.jpg
514-Port-Bow-Tower-Lighting
513-Main-Deck-Lighting.jpg
513-Main-Deck-Lighting
512-Stern-Lanterns.jpg
512-Stern-Lanterns
511-Sprit-Top-Assembly-Fitted-Loose.jpg
511-Sprit-Top-Assembly-Fitted-Loose
509-Measure-Trestle-Tree-Width.jpg
509-Measure-Trestle-Tree-Width
508-Make-Trestle-Trees-for-Sprit-Topmast.jpg
508-Make-Trestle-Trees-for-Sprit-Topmast
506-Fore-Topmast-Top-Corrected-Cap-Height.jpg
506-Fore-Topmast-Top-Corrected-Cap-Height
507-Paint-Nails-on-All-Topmast-Cheeks.jpg
507-Paint-Nails-on-All-Topmast-Cheeks
505-Progress-So-Far.jpg
505-Progress-So-Far
504-Tops-Fitted-So-Far.jpg
504-Tops-Fitted-So-Far
503-Assembly-Fore-Topmast-Top-Assembly-the-Same-Way.jpg
503-Assembly-Fore-Topmast-Top-Assembly-the-Same-Way
502-File-Square-Then-Stain.jpg
502-File-Square-Then-Stain
501-Make-Hole-width-Dremel-with-Diamond-Burr.jpg
501-Make-Hole-width-Dremel-with-Diamond-Burr
500-Measure-for-Hole-Size-in-Top.jpg
500-Measure-for-Hole-Size-in-Top
499-Main-Topmast-Fitted.jpg
499-Main-Topmast-Fitted
498-Main-Topmast-Lug-on-Foot-of-Mast.jpg
498-Main-Topmast-Lug-on-Foot-of-Mast
497-Main-Topmast-Trestles-Installed.jpg
497-Main-Topmast-Trestles-Installed
496-Main-Topmast-Top-Assembly.jpg
496-Main-Topmast-Top-Assembly
495-Mizzen-Top-Fiited.jpg
495-Mizzen-Top-Fiited