Added to Guillow's Fokker Dr.1 — 3 years ago
Looking lovely after a couple of coats of dope. How many coats is dependent on the intended use. I'm building it for display, so weight is of no concern. I'll keep applying coats until a fresh coat no longer makes the tissue sag. Eventually, after many coats, the dope leaves hydrophobic blush on the surface after it dries. When that happens, it can easily be removed by wiping it off with Isopropyl alcohol. This should also be done after doping and before any painting. I applied 4 coats at 20-1 and then switched to 3-1 for an additional 7 coats. Total time doping, not including drying time was 3:10. Definitely the most boring part of building these things.
- Camera Make samsung
- Camera Model SM-P610
- Exposure Time 1/40s
- Aperture ƒ/1.9
- ISO 125
- Focal Length 291/100 mm
- Brightness Value 163/100
- Color Space sRGB
- Contrast Normal
- Date Time Digitized 2023-02-13 09:07:44
- Date Time Original 2023-02-13 09:07:44
- Digital Zoom Ratio 0/0
- Exif Version 0220
- Exposure Bias Value 0/10
- Exposure Mode Auto
- Exposure Program Program AE
- Flash No Flash
- Max Aperture Value 185/100
- Metering Mode Center-weighted average
- Orientation Horizontal (normal)
- Resolution Unit inches
- Saturation Normal
- Scene Capture Type Standard
- Sharpness Normal
- Software P610XXS2EVJ2
- White Balance Auto
- X Resolution 72/1 dpi
- Y Resolution 72/1 dpi